How to Install Huion Drivers on Windows?

This article gives a step by step tutorial about how to install Huion drivers on Windows. If you have no idea about how to install Huion drivers on Windows properly, this tutorial will give you some help.

Part 1. Precautions of before driver installation

1) If there is a graphic tablet driver installed on your Windows already, please make sure the driver that exists already has been uninstalled before installing the new one, otherwise conflicts will occur. (Please check Three Methods to Uninstall Huion Drivers on Windows 7 to uninstall the former Huion driver properly)

2) After uninstalling the former driver, please restart your computer.

3) Please turn off the anti-virus software and drawing software on your computer before installing the new driver, otherwise you will fail to install the new driver.

4) No connection between your graphic input device and computer before the driver is installed, otherwise you may come across the delay or error issue in system identification when you install the driver.

5) Do not change the default path when installing the driver. Please click Install to continue.

Part 2. Guideline for installation of Huion driver V14, V13 and V12

 

 

Steps for installing V14 driver

Step 1. Visit Huion’s official website(www.huion.com/download) and download the driver you need.

 

To make sure that you can access the corresponding driver, please type the complete name of your model. For example, the full name of your graphic tablet is WH1409 V2 , you should type WH1409 V2 , instead of WH1409.

 

Step 2. Open the zip file HuionTablet_WinDriver_v14.7.60.339_8192_ZIP downloaded from Huion’s official website, and then double-click the HuionTablet_WinDriver_v14.7.60.339. exe to launch the program.

 

 

Step 3. Make sure you have closed all painting program before installing the  driver and then click Yes for the next step.

 

 

Step 4. Click Install to continue.

 

 

Step 4. Click Completing the Setup Wizard

 

 

Step 5. The gray icon down the right corner of the desktop will turn into blue as you have your graphic input device connected with the computer. Device connected will also be indicated on the driver interface, which means the driver has been successfully installed and everything is ready for your drawing.

 

 

 

Steps for installing V13 driver

Step 1. Visit Huion’s official website(www.huion.com/download) and download the driver you need.

 

 

Step 2. Open the zip file HuionTablet_WinDriver_v13.15.35.zip downloaded from Huion’s official website. Open the HuionTablet_WinDriver_v13.15.35 file and then double click the HuionTablet_WinDriver_v13.15.35\TabletDriverInstaller.exe file to launch the program.

 

 

 

Step 3. Make sure you have closed all painting software before installing the  driver and click Yes for the next step.

 

 

Step 4.  Click the Next button when the following three prompts come out.

 

 

 

 

Step 5. Click the Install button and start to install the driver.

 

 

 

Step 6. Click the Finish button to complete the installation.

 

 

Step 7. Connect your graphic tablet or pen display to your computer via USB /VGA/HDMI/three-in-one cables. The gray icon  down the right corner of the desktop will turn into blue  and Device connected will also be shown on the driver interface.

 

 

Steps for installing V12 driver

Step 1. Visit Huion’s official website(www.huion.com/download) and download the driver you need.

 

 

Step 2. Open the zip file WIN_1060pro_H610Pro_H610_Driver V12.3.7.zip downloaded from Huion’s official website. Double-click the HUION_H610_H610Pro_1060Pro+_V12.3.7.exe file to lanuch the program.

 

 

Step 3. Make sure you have closed all painting software before installing the  driver and click Yes for the next step.

 

 

Step 4. Click the Next button when the following four prompts come out.

 

 

 

 

 

Step 5. Click the Install button and start to install the driver.

 

 

 

Step 6. Click the Finish button to complete the installation.

 

 

Step 7. Connecting the graphic tablet to your computer via an USB cable, the icon  on the bottom right corner of the computer will be replaced by the icon .  Also, it will show Device connected on the driver interface as the picture shown below.